Oki ML590 Printer User Manual


 
Contact of Space Motor Assembly Gear
and Space Rack
3.2.11
Oil Small
Contact between Platen Shaft and
Platen Ground Spring
3.2.19
Grease Small
Contact between Bias Gear and Platen
Gear
3.2.19
Oil Small
Bearing of Change Lever
3.2.23
Grease Medium
Bearing and Pivot Point of Change Lever
3.2.23
Grease Medium
Pivot Point of Release Cam
3.2.24
Grease Medium
Holders on Pressure Spring
3.2.24
Grease Medium
Bearing of Front Release Gear Arm
3.2.24
Grease Medium
Carriage Shaft NOTE: <_><_>Place a
small amount on the surface then wipe
clean.
3.2.25
Oil
See
NOTE
Front Release Gear Shaft
3.2.27
Grease Medium
Contact between Front Roller Holder and
Front Pressure Roller
3.2.28
Oil Small
Bearing of Tractor Gear
3.2.29
Grease Medium
Contact between Lower Tractor Feed
Shaft and Main Frame
3.2.29
Grease Medium
3.5.06 Areas Not Lubricated
Lubricant should never contact the parts listed below.
Ribbon
Platen Assembly (Rubber Face)
Pressure Roller (Rubber Face)
Tractor Pins