Filter
Top Products
Page: 132
Service Guide ML590/ML591
Chapter 3 Maintenance & Disassembly
3.3.05 Top of Form
General Information
Top of Form is the distance from the top edge of the paper to the first print position on the page.
The red line on the ribbon protector indicates the baseline of the Top of Form.
Setting Top of Form
1. Deselect the printer. The
SEL
lamp must not be lit.
2. To set the
TOF
further down the page, press and hold the
SHIFT
switch while pressing the
FF/LOAD
switch. This will advance the paper in micro increments.
3. To set the
TOF
higher on the page, press and hold the
SHIFT
switch while pressing the LF
switch. This will retract the paper in micro increments.
4. This setting will be kept in memory until you power off the printer or until you change the
setting.
5. To maintain this setting in the printer's memory (even when the printer is powered off), press
and hold the
SHIFT
switch while pressing the
QUIET/TOF
switch.
6. Press the
SEL
switch.
Reset the Top of Form to Factory Default
1.
Power off the printer.
2. Press and hold the
QUIET
and
FF/LOAD
switches while you power on the printer.
NOTE:
The factory default Top of Form Setting is 1 inch.
Copyright 1997, Okidata, Division of OKI America, Inc. All rights reserved. See the OKIDATA Business
Partner Exchange (BPX) for any updates to this material. (http://bpx.okidata.com)