Filter
Top Products
C9300/C9500 Windows NT 4.0 Printer Drivers • 285
ENABLING INSTALLED OPTIONS IN THE DRIVERS
Certain options such as additional memory, the duplexer, or
additional trays may be installed in your printer.
Before using the printer, you must enter the printer driver(s) and
enable the options. You only need to do this once.
For additional memory: PostScript driver only
If you have additional memory in your printer, use these instructions
to update the Windows PostScript driver so that it recognizes the
additional memory:
1. Click Start ® Settings ® Printers.
2. Highlight the printer name and click File then Properties.
3. Click the Device Settings tab.
4. Under Installable Options, click Memory Configuration, then
select the memory in the Change ‘Memory Configuration’
Setting list which matches what is now installed in the printer, as
shown in the MenuMap (to generate a MenuMap printout, see
“Printing the MenuMap” on page 33)
5. Click OK and close the Printers dialog box.