Filter
Top Products
Microline 8810 User’s Guide
16
Print Modes
Your printer has two print modes:
• Normal: corresponds to the printer settings. The factory default is
utility, high speed draft.
• Quiet: reduces noise by printing at one-half the speed.
Change Print Mode
Change to Quiet
Note If you change the print mode while printing, the printer immediately
switches to the new print mode.
1. Make sure the printer is turned on and that the SEL light is on.
2. Press FF. FF.jpg
The QUIET light goes on.
Change to Normal
Note If you change the print mode while printing, the printer immediately
switches to the new print mode.
1. Make sure the printer is turned on and that the SEL light is on.
2. Press LF. LF.jpg
3. The QUIET light goes out.
8810_3_crop.jpg