Filter
Top Products
Microline 8810 User’s Guide
28
Example: Turn on Proportional Spacing and Form Tear-Off
1. Turn on the printer.
2. Press SEL.
The printer goes off-line.
3. Simultaneously press SHIFT and MODE.
4. Press and hold SHIFT, then press FF repeatedly until
FONT displays.
5. Press FF repeatedly until PROP. SPACING displays.
6. Press MODE.
The setting changes to
YES.
7. Press and hold SHIFT, then press FF repeatedly until
FRONT FEED
displays.
8. Press FF repeatedly until FORM TEAR-OFF displays.
9. Press MODE repeatedly until the time interval you wish to select
appears.
10. Press LOAD: this saves your setting and exits the menu mode.
8810_3_crop.j