Filter
Top Products
Microline 8810 User’s Guide
13
Control Panel Lights
Light On Off
Blinking
a
POWER Printer is turned
on.
Printer is turned
off.
N.A.
ALARM • Paper is out.
• A paper jam has
occurred.
See
“Troubleshooting”
on page 82.
Printer operation is
normal.
• Awaiting removal of
single sheet/form.
• Media switch is
taking place.
•Skew detection
alarm.
• If both the ALARM
and SEL lights are
blinking, the cover
is open.
• If both the ALARM
and AUTO ALIGN
lights are blinking,
there is an
unrecoverable
error. Try turning
the printer off, then
on again. If this
doesn‘t clear the
problem call your
service dealer
AUTO GAP Auto Gap mode is
selected (the
default).
A Manual Gap
setting is engaged.
Manual Gap setting
alarm.
QUIET The printer is in
the Quiet print
mode.
The printer is in
the Normal print
mode.
N.A.
AUTO ALIGN The printer is set
to automatically
align single
sheets/ forms.
Auto Align is
disabled
If both AUTO ALIGN
and ALARM are
blinking, it indicates
an unrecoverable
error. Try shutting the
printer off and turning
it on again. If this
doesn’t work, call your
service dealer.