Filter
Top Products
Microline 8810 User’s Guide
69
Auto Align
The printer is set at the factory for Auto Align enabled. This feature
automatically aligns single sheets or forms placed on the platform with the
platen as they are drawn into the printer.
Auto Align cannot be used with envelopes. To print envelopes, you must
disable Auto Align (see below), then use the sheet guide (1) to load and align
the envelope.
Disabling Auto Align
To disable Auto Align, you must go into the printer menu:
1. Press SEL.
The printer goes off-line.
2. Simultaneously press SHIFT and MODE.
The printer enters the Menu Mode. PRINTER CONTROL displays.
3. Simultaneously press SHIFT and FF repeatedly until MANUAL FEED
displays.
4. Press FF repeatedly until
AUTO ALIGN displays.
5. Press MODE repeatedly until the setting
INVALID displays.
6. Press LOAD to save your new setting and exit the menu mode.
Sheet_Guide_crop1.jpg
8810_3_crop.jpg