Microline 8810 User’s Guide
60
Manual Sheet CSF
Applies only when the optional CSF is installed.
Determines which TOFs and Eject Direction settings will be used
for manual feed sheets printed while the CSF is selected. If you
want the printer to use the Manual Feed menu settings, change
the setting to Manual.
Memory Auto Align
Applies only to manual feed from the platform.
The default is Valid. This causes the Auto Align setting made
using the front panel switches MODE and SHIFT (see page 11) to
be stored in the printer’s memory. Change to Invalid if you do
not wish this value to be stored.
Multi Pass
Select the print direction (Bi-directional: the default, or
Uni-directional) for a line containing double-height print.
Page Length
Choose the length of the media you are using:76.2 mm (3"),
82.6 mm (3.25"), 88.9 mm (3.5"), 101.6 mm (4"), 127.0 mm
(8"), 139.7 mm (5.5"), 152.4 mm (6"), 177.8 mm (7"), 203.2
mm (8"), 215.9 mm (8.5"), 279.4 mm (11") [the default], 296.3
mm (11.67"), 304.8 mm (12"), 355.6 mm (14"), 431.8 mm
(17").
Note If the printer receives a page length setting command, it
will override this menu setting.
Page Width
Choose the width of the media you are using: 8", 10.6", 13.2",
or 13.6" [the default].
Panel Function
When the Panel Function setting is changed to Limited, the
QUIET (SHIFT + FF) and NORMAL PRINT (SHIFT + LF) switches
don’t work. This prevents these settings from being changed
when several people are using the printer.