Oki 8810 Printer User Manual


 
Microline 8810 User’s Guide
65
Reset Inhibit
The default is No. Change this to Yes to prevent your software
from resetting your printer’s settings. The printer will ignore an
INITIAL command.
Sheet Feed Mode
Applies only when the optional CSF is installed.
Sets whether Manual [the default] or Auto cut sheet feed mode
(CSF) is engaged when the printer is initialized.
SI Pitch (10)
IBM emulation only.
Sets the pitch to be engaged when the printer control panel is
set for 10 cpi and the SI command is received. Choose 15 cpi or
17.1 cpi [the default].
SI Pitch (12)
IBM emulation only.
Sets the pitch to be engaged when the printer control panel is
set for 12 cpi and the SI command is received. Choose 12 cpi or
20 cpi [the default].
Size
The default is Single. Choose Double for double width and height
printing.
Skew Detect
Detects and corrects paper skew when manual feed through the
platform—or the optional CSF mounted on the front—is being
used with Auto Align disabled. Available settings: Valid Level 1,
Valid Level 2 [the default], or Invalid.
Change to Valid Level 1 if you wish the detection to be more
precise.
Change to Invalid if you are experiencing difficulty getting forms
to load into the printer when using preprinted forms with