Filter
Top Products
English
User’s Guide 15
Spool manager
The Spool Manager is a queue for pending print jobs. There are
some conditions during which some jobs will not print and will be
held in the queue.
To release the documents for printing, perform the following:
1. Open the Spool Manager.
2. Select the OKIJET 2500 printer.
3. Pull down the Queue menu and select the checked Hold menu
item to release the document for printing. The status will change
to Active.
If you continue to have problems, close the Spool Manager. Do not
save the job and resend the document.
Note: Individual documents can be deleted by using the pull down
Document menu.
Troubleshooting
Clearing paper misfeeds
1. The red Error Light will be lit to indicate a paper jam.
2. Remove all paper from the Paper Tray.
3. Fan the paper and reinstall it in the Paper Tray. Press and
release the Resume/FF button to continue the print job.
4. If the misfeeds continue, flip the paper stack over, press
and release the Resume/FF button to continue the print job.
2500ugb.p65 02/06/98, 11:3215