Filter
Top Products
26
2
Pause
Press the REC button while recording.
➥
[Rec Pause] will flash on the display.
• When leaving the device idle while pausing
recording for over 1 minute, the device will beep at
a 5 second interval to notify the user that the device
is paused.
• The recorder will time out after 2 hours when left in
[Rec Pause].
Resume Recording
Press the REC button again.
➥
Recording will resume at the point of
interruption.
Recording
Recording
Notes
• If you select a folder other than
A
through
E
and press the REC button, an [Illegal Folder] message
will flash. Select a folder from
A
through
E
and start recording again.
• To ensure recording from the beginning, start speaking after you see the red record/play indicator light on.
• A beep will sound when remaining recording time reaches 60 seconds, 30 seconds, and 10 seconds
while recording.
• When remaining recording time is less than 60 seconds, the record/play indicator light starts flashing in
red. When the recording time is decreasing to 30 or 10 seconds, the light flashes faster.
• [Memory Full] or [Folder Full] will be displayed when the memory or folder capacity is full. Delete any
unnecessary files before recording any further. (☞ P.70)