Filter
Top Products
45
2
8
Completing the setting.
1 Press the + or – button to choose
[Finish].
2 Press the OK button to complete the
setup screen.
Programmed settings will be applied and the
screen will return to the preset number
selection menu. If the On/Off setting is set
to On,
and (Timer indicator) will
appear on the display.
If you press the 0 button without pressing
the OK button, all settings will be canceled
and it will return to the preset number
selection menu.
a Timer indicator
When setting other preset numbers, repeat
Steps 4 through 8.
9
Press the STOP button to close the
menu.
Timer Recording
Timer Recording (Timer Rec)
2
1
9
..................................................................................................................................................
Notes
• If the recorder is in use at the preset start time, the timer recording will start directly after stopping the
recorder.
• Even if the power if turned off or the recorder is put on Hold, timer recording will start at a specified time.
• If three timer recordings have the same starting times, [Preset 1] has the highest priority and [Preset 3]
has the lowest.
• If the starting time for timer recording and alarm playback (☞ P65) is set for the same time, timer
recording will have priority.
• If the batteries run out while recording based on the timer setting, the recorder will stop recording.
Check the battery power before starting the timer recording.
• The microphone sensitivity switch setting will be canceled during timer recording.
• If the [Time&Date] is not correct, timer recording cannot be set at the specified time, so make sure the
[Time&Date] is correct before setting timer recording. If it is not correct, reset [Time&Date]. (☞ P18)