Filter
Top Products
38
4 Removing a card <Mac OS X
ࡗ
Operation>
Close all software programs that are using data on the card (e. g. graphics applications), then follow the steps
below.
Attention!
● If you do not follow the steps below, the data on the card may be damaged.
● Do not apply force to the computer's USB port or the MAUSB-100 when removing/inserting a card from/
into the MAUSB-100 if it is directly connected to the computer's USB port.
2. Make sure that the status lamps go out
completely.
3. Release the hold switch, then pull the card out of
the card slot as shown.
1. Drag & drop the card’s icon onto the Trash icon.
Drag & Drop
To perform a drag and drop, press and hold the mouse
button over the selected file(s), then move the mouse
(drag) and release the button at the place where you
want to copy (drop).
Note
• NEVER release the hold switch, remove the card or disconnect the MAUSB-100 from the computer while
the red status lamp is lit. Doing so may destroy the data on the card or the card itself, or cause the
computer to malfunction.
• Be careful when removing the card as it can get hot after extended use. Take special care not to touch the
card’s terminals.
5 Disconnecting the MAUSB-100 <Mac OS X
ࡗ
Operation>
Close all software programs that are using data on the card (e. g. graphics applications), then follow the steps
below.
1. If a card is already inserted in the MAUSB-100, drag & drop the card's icon onto the Trash icon.
2. Make sure that the status lamps go out completely.
3. Unplug the MAUSB-100 from the computer’s USB port.
128
MB
128
MB
Status lamps
1 Release the hold switch
2 Remove the card