Olympus V402110BU000 Microcassette Recorder User Manual


 
16
1
EN
Turning on the recorder/ Memory card
Move the POWER switch to [ ON] position to activate
the recorder.
Turning on the recorder
This recorder uses two types of memories: a microSD
card as internal memory, and an SD card as additional
memory.
You can remove the content recorded in both the
cards safely in case of malfunction of the recorder.
Compatible cards
The recorder supports memory card capacity from
512 MB up to 32 GB.
Check the Olympus homepage
( http://www.olympus.com ) for updates and
information when using cards different from
the included one.
Notes
When initializing (formatting) a card,
confirm that no necessary data is stored on
the memory card beforehand. Initialization
completely erases the existing data on the
card.
Cards formatted (initialized) by another device,
like a computer, may not be recognized. Be sure to
format them with this recorder before use.
The card has a service life. When reaching the end
of its life, writing or erasing data on the card will
be disabled. In this case, replace the card.
If you use a PC card adapter compatible with the
card to save or delete some data on the card, the
maximum recording time on the card may be
decreased. To recover the original recording time,
initialize/format the card in the recorder.
Memory card
Cards compatibility