Filter
Top Products
TC-08 User's Guide28
Reserved error codes
Error
code
Error
Further information
7
USBTC08_ERROR_NOT_RESPONDING
Cannot get a reply back from a USB
TC-08 unit.
8
USBTC08_ERROR_FW_FAIL
Unable to download firmware.
9
USBTC08_ERROR_CONFIG_FAIL
Missing or corrupted EEPROM.
10
USBTC08_ERROR_NOT_FOUND
Cannot find enumerated device.
11
USBTC08_ERROR_THREAD_FAIL
A threading function failed.
12
USBTC08_ERROR_PIPE_INFO_FAIL
Can not get USB pipe information.
13
USBTC08_ERROR_NOT_CALIBRATED
No calibration date was found.
14
USBTC08_ERROR_PICOPP_TOO_OLD
An old picopp.sys driver was found
on the system.
Note: These reserved error code values are meaningful only to our technical support
staff, but they are supplied to allow developers to display warnings in their
applications. For more details on error codes, see troubleshooting.
Arguments
handle
Specifies the USB TC-08 unit.
Returns
-1
Invalid handle.
Error
code
See the error code information above for further
explanation.