Filter
Top Products
2 - 3
2 RECEIVING FUNCTIONS
Input range table
Input type Range Input Measurement range Unit
DC Voltage
20 mV 20 mV -20.00 to 20.00 mV mV
60 mV 60 mV -60.00 to 60.00 mV mV
200 mV 200 mV -200.0 to 200.0 mV mV
2 V 2 V -2.000 to 2.000 V V
6 V 6 V -6.000 to 6.000 V V
20 V 20 V -20.00 to 20.00 V V
Input type Range
Measurement range
˚C
T C
R 0.0 to 1760.0 ˚C
S 0.0 to 1760.0˚C
B 0.0 to 1820.0˚C
K -200.0 to 1370.0˚C
E -200.0 to 800.0˚C
J -200.0 to 1100.0˚C
T -200.0 to 400.0˚C
L -200.0 to 900.0˚C
U -200.0 to 400.0˚C
N 0.0 to 1300.0˚C
W 0.0 to 2315.0˚C
R T D
JPT -200.0 to 550.0˚C
PT -200.0 to 600.0˚C
CU1 to CU6* -200.0 to 300.0˚C
CU25* -200.0 to 300.0˚C
Measurement range
˚F
32 to 3200°F
32 to 3200°F
32 to 3308°F
–328.0 to 2498.0°F
–328.0 to 1472.0°F
–328.0 to 2012.0°F
–328.0 to 752.0°F
–328.0 to 1652.0°F
–328.0 to 752.0°F
32 to 2372°F
–328.0 to 752.0°F
–328.0 to 1112.0°F
–328.0 to 1022.0°F
–328.0 to 1112.0°F
–328.0 to 1022.0°F
* Allowed when the /N1 option (Cu10, Cu25) is equipped.
DI (Digital Input)
Format: SRp1, mode, p2
p1: Channel number (CC)
mode: DI (digital input)
p2: Select the signal type from LEVL (level) or CONT (contact).
Example:SR01, DI, CONT
SCL (Scaling)
Format: SRp1, mode, p2, p3, p4, p5, p6, p7, p8
p1: Channel number (CC)
mode: SCL
p2: Input type. VOLT, TC or RTD
p3: Range
p4: Low limit value of the display span (LOWER SPAN). Enter 5
digits, excluding the decimal point and the + or – sign.
p5: High limit value of the display span (UPPER SPAN). Enter 5
digits, excluding the decimal point and the + or – sign.
p6: Lower scale limit (SCL LOWER). Enter 6 digits, excluding the
decimal point and the + or – sign.
p7: Upper scale limit (SCL UPPER). Enter 6 digits, excluding the
decimal point and the + or – sign.
p8: Decimal point position of scaling value (0 to 4, which stands for
the number of digits after the decimal point)
2.2 Program Set Commands