Filter
Top Products
4.5.8 Device Setup -C4EIT
This option allows the users to add up to eight device names, commands and a
response unit. The iServer will send the entered commands on the serial port and
will receive the responses from those devices. Clicking on Readings page link will
show the response.
On this page there is a Device Number column (No), which has numbers from 1
to 8.
These numbers are links to the parameters of each device; click on them to enter the
device name, address, command and unit.
Figure 4.15 iServer DEVICE SETUP Page – RS485 (-C4EIT)
30