Filter
Top Products
Appendix J iPORT (continued)
J-3 iPORT Configurations (continued)
Figure J-3 iPORT Main Window
Figure J-4 COM Port Window
iServer IP Address – This is the IP address of the iServer that is connected to the
serial device on one end and attached to the Ethernet LAN on the other end. The
iServer’s default IP address is 192.168.1.200, which can be changed to fit your
network IP address range (see Section 4).
iServer Port Number – This is the port number for the iServer’s local serial port.
The default value is 2000. If this port number is changed in the iServer’s
Configuration page (see Section 4.5.4.1), the same number should be placed in the
iPORT window.
2000
192.168.1.200
5000
63