Omega -C4EIT/-EIT Switch User Manual


 
PART 5
SPECIFICATIONS
Serial Interface (-C4EIT)
Interface: RS422 or RS485 (2-wire)
Connector: Terminal Block Plugs
Serial Data Rates: 300 to 460,800 bps*
*iSeries Controller max is 19,200 bps
Characters: 5, 6, 7, or 8 data bits
Parity: odd, even, or none
Stop Bits: 1 or 2
Flow Control: Software (Xon/Xoff) and None
Network Interface
Interface: Fixed 10BASE-T half duplex Ethernet
Connector: RJ-45
Protocols: TCP, UDP, SNMP, SMTP, TFTP, ICMP, Telnet, DHCP, DNS,
HTTP, ARP, and Modbus TCP/IP
Compliant to Standard: IEEE 802.3
Indicators (LED’s): 10BASE-T (green) not active, On/Network (green),
Serial Transmit Tx (yellow), Serial Receive Rx (green);
Power (green)
Processor CPU: ARM7, 72 MHz
Processor Memory: 512 Kbyte Flash, 32 Kbyte SRAM
Embedded Web Server: Serves dynamic Web pages and Java applets
Management: Device configuration and monitoring through Embedded Web
Server, Telnet login, Serial login, iConnect
General
Environmental
Operating Temperature: 0 to 50°C (-32 to 122°F), 90%RH non-condensing
Line Voltage/Power: 90 to 240 Vac +/-10%, 50 to 400 Hz*
110 to 375 Vdc, equivalent voltage
4 W, power for i8, i16, iDR Models + Ethernet
5 W, power for i8DV, i8DH, i16D Models + Ethernet
* No CE compliance above 60 Hz
Low Voltage/
Power Option: 20 to 36 Vdc, 4 W
External power source must meet Safety Agency Approvals.
*Units can be powered safely with 24 Vac power but,
no Certification for CE/UL are claimed.
39