Filter
Top Products
OM-550 DOS Software ♦♦ii ♦♦
INTRODUCTION
This Software User’s Guide explains how to use Omega’s OM-550 DOS software.
The software requires an IBM PC or compatible, with 640K of ram and 1 or 2 serial
ports.
The software is supplied on a 3 ½” disk, and it is recommended that at lease one
backup copy is made to hold in reserve. Refer to your computer manual for copying
instructions.
OM-550 data can be saved to disk as experiment files. The files are automatically
named with the word LOG, followed by three numbers, like LOG007. The numbers will
increment as new experiments are saved or can be user configurable.
In addition to the OM-550 data, an experiment file can (optionally) contain information
describing the parameters of the experiment and the data.
ŸŸ How to Use This Manual
This manual is written for users of varied experience. If a section covers information
you already know, feel free to skip to the next section.
• You do not need to be a computer expert to use this manual or the software.
ŸŸ Terms Used in this Manual
The following definitions, special terms and symbols will be used in this manual.
• Thermocouple, may be referred to as T/C
• Informs the user that the note includes important information.
• Informs the user that the note includes a handy software tip.