Filter
Top Products
Manual No. 25-ULNFT2100-01; Mar, 2005 NFT 2100 CCD Fixed Mount Barcode
Scanner
Page 57
Mode Trigger Function Enabled (S8)
Trigger Function Disabled (S7)
After receiving a trigger pulse,
scanner will read multiple, different
bar codes in succession until it times
out. (Each read will reset the
scanner’s time out)
Scanner will read different bar codes
in succession if they are presented to
the read window.
Multiple
Read
(S1)
Scanner may not read the same bar
code twice if they are consecutive.
(See Sect. 32)
Scanner may not read the same bar
code twice if they are consecutive.
(See Sect. 32)
Continuous
Read
(S2)
Scanner will read the same bar code
continuously after receiving a trigger
pulse until the label is removed. The
LEDs then time out.
Scanner will read the same bar code
continuously.
Single
Read
(S0)
Scanner will read only one bar code
after receiving a trigger pulse. The
scanner time out is terminated on a
good read.
Same as Multiple Read mode, above.