Filter
Top Products
Manual No. 25-ULNFT2100-01; Mar, 2005 NFT 2100 CCD Fixed Mount Barcode
Scanner
Page 59
28. Scanner Timeout (Trigger Enabled Mode only)
These commands, which are only applicable in the Trigger Enabled mode, establish the time-out period
after the trigger pulse is received. In Single Read Mode, the time out is terminated upon a good read.
In Multiple Read and Continuous Read Modes the time out period is restarted after any good read.
Computer
Command
Function
/Description
Bar Code
Command
(ZZ)
START/END
Programming Menu
[[
Y1
1 Second after triggering
Z2
Y2
2 Seconds after triggering
Z3
%
Y3
3 Seconds after triggering
Z!
Y4
4 Seconds after triggering
Z5
Y5
5 Seconds after triggering
Z6
Y6
6 Seconds after triggering
Z7
Y7
7 Seconds after triggering
Z8
Y8
8 Seconds after triggering
Z9
Y9
9 Seconds after triggering
Z:
YL
Read time x 10
ZM
Y0
On time follows the Hardware
trigger active time. Can be
terminated by sending the Y
command
Z1
YM
Stays ON indefinitely after
triggering. Must be terminated
by sending the Y commands.
ZN