1313131313
Packard Bell EasyNote MX Disassembly Manual
13
Bluetooth (Optional)
To remove the optional Bluetooth module, first remove the battery (see Battery
), the HDD (see Hard Disk
Drive), the CD-ROM or DVD drive (see Optical Disk Drive), the wireless network card (see WLAN Card),
the installed memory (see Memory
), the CPU (see Processor), the keyboard (see Keyboard), remove the
LCD screen (see LCD Screen Assembly
), the main board up to step 8 (see Main Board), and then
perform the following steps:
1. Carefully disconnect the Bluetooth cable.
Fig. 21 Location of Bluetooth module and connector.
2. Extract the Bluetooth module; the module has been clicked into place (see Fig. 21).
Touchpad
To remove the touchpad, first remove the battery (see Battery
), the HDD (see Hard Disk Drive), the CD-
ROM or DVD drive (see Optical Disk Drive), the wireless network card (see WLAN Card), the installed
memory (see Memory
), the CPU (see Processor), the keyboard (see Keyboard), remove the LCD screen
(see LCD Screen Assembly), the main board top cover up to step 7 (see Main Board), and then perform
the following steps:
1. Remove the 2 screws securing the touchpad buttons board to the top cover.
Fig. 22 Location of touchpad buttons board.