Filter
Top Products
55555
Packard Bell EasyNote MX Disassembly Manual
5
4. Remove the 4 screws on the metal bracket to separate it from the hard disk drive.
Fig. 3 Location of hard disk drive bracket screws.
Optical Disk Drive
To remove the CD-ROM or DVD drive, first remove the battery (see Battery
), remove the HDD cover (see
Hard Disk Drive
) and then perform the following steps:
1. Locate and remove the screw securing the optical disk drive in the hard disk drive compartment.
Fig. 4 Location of optical disk drive screw.
2. Use the emergency eject hole to open the optical disk drive.
3. Take out the optical disk drive from the drive bay.
WLAN Card
To remove the WLAN card, first remove the battery (see Battery
) and then perform the following steps:
1. Remove the 7 screws retaining the CPU cover (see Fig. 1
).