Filter
Top Products
1414141414
Packard Bell EasyNote MX Disassembly Manual
14
2. Disconnect the 2 flat cables and separate the part from the top cover (see Fig. 22).
Note: The touchpad area and the buttons are separate parts: the touchpad area is part of the top cover. To
replace the touchpad area, disconnect all flat cables on the top cover and replace the entire top cover.
Speakers
To remove the speakers, first remove the battery (see Battery
), the HDD (see Hard Disk Drive), the CD-
ROM or DVD drive (see Optical Disk Drive
), the wireless network card (see WLAN Card), the installed
memory (see Memory
), the CPU (see Processor), the keyboard (see Keyboard), remove the LCD screen
(see LCD Screen Assembly), the main board top cover up to step 7 (see Main Board), and then perform
the following steps:
1. Disconnect the speaker cable from the main board (see Fig. 19
).
2. Remove the 2 screws on both speakers and remove the speakers.
Fig. 23 Location of speaker assembly screws.
Subwoofer (Optional)
To remove the optional subwoofer, first remove battery (see Battery), the HDD (see Hard Disk Drive), the
CD-ROM or DVD drive (see Optical Disk Drive), the wireless network card (see WLAN Card), the
installed memory (see Memory
), the CPU (see Processor), the keyboard (see Keyboard), remove the
LCD screen (see LCD Screen Assembly
), the main board top cover up to step 7 (see Main Board), and
then perform the following steps:
1. Disconnect the subwoofer cable from the main board.
Fig. 24 Disconnecting the subwoofer cable.