1111111111
Packard Bell EasyNote SL Disassembly Manual
11
4. Remove the two screws securing the metal bracket and remove it from the drive.
Fig. 15 Removing metal bracket.
TV Tuner (Optional)
To remove the optional TV tuner, first remove the battery (see Battery
on page 4), and then
perform the following steps:
1. Remove the two screws securing the TV tuner compartment cover (see Fig. 9
).
2. Lift the cover upwards from the left. There are three tabs holding the cover in place on the
right. Raise the cover until you can remove it from the casing (see Fig. 9
).
3. Carefully disconnect the TV antenna cable.
Fig. 16 Location of antenna cable connector and screw.
4. Remove the screw securing the TV tuner (see Fig. 16); the card will eject upwards.