Filter
Top Products
66666
Packard Bell EasyNote SL Disassembly Manual
6
6. Remove the two screws on the metal bracket to separate it from the hard disk drive.
Fig. 5 Location of hard disk drive bracket screws.
Hard Disk Drive 2
To remove the right hard disk drive, first remove the battery (see Battery
on page 4) and then
perform the following steps:
1. Remove the screw securing the right hard disk drive compartment cover.
Fig. 6 Removing hard disk drive compartment cover.
2. Lift the cover upwards from the right. There are two tabs holding the cover in place on the
left. Raise the cover until you can remove it from the casing (see Fig. 6
).