Filter
Top Products
44444
Packard Bell EasyNote SL Disassembly Manual
4
Battery
Perform the following steps to remove the battery:
1. Make sure the power is off.
2. Turn the notebook upside down.
Note:
Use an anti-static mat or something soft like a piece of cloth underneath the notebook to prevent damage to
the exterior of the notebook.
3. Slide the battery lock/unlock latch to the unlock position.
Fig. 1 Removing the battery.
4. Slide and hold the battery release latch to the release position and, at the same time, lift the
battery upwards. There are three tabs holding the battery in place at the back (see Fig. 1
).
5. Take the battery out of the compartment (see Fig. 1).
Hard Disk Drive 1
To remove the left hard disk drive, first remove the battery (see Battery
on page 4) and then
perform the following steps:
1. Remove the screw securing the left hard disk drive compartment cover.
Fig. 2 Removing hard disk drive compartment cover.
2. Lift the cover upwards from the left. There are two tabs holding the cover in place on the
right. Raise the cover until you can remove it from the casing (see Fig. 2
).