Filter
Top Products
E-12
ENGLISH
Control reference guide (continued)
Left side
Back
Sliding switch cover
Sliding switch
Slide toward the front to enable software
updates.
Normally, keep the switch toward the back.
(See page E-28)
Power inlet
Insert an optional battery pack or AC adapter
here.
DC IN socket (7.9 V)
Battery lock release button
When removing optional battery packs or AC
adapters, hold down the button as you slide it
toward the button side.
VERIFY switch
Use this switch to verify data after it has been
copied from P2 cards onto the internal HDD.
(See page E-16)
ON : Verify
OFF: Do not verify
Note:
To ensure accurate copying, slide the
VERIFY switch to ON. If it is set to OFF, the
unit may not be able to copy correctly in some
cases. However, note that copying will take
twice as long with verification (when ON) than
without (when OFF).
Rear panel
side
Front panel
side