Filter
Top Products
E-19
Connecting to a computer
Connect the unit to a computer with the USB 2.0 cable to back up data from P2 cards and the
internal HDD on the computer.
System requirements
Your computer must meet these requirements for the P2 driver, the dedicated driver for this
unit, and the dedicated software.
Operating system: Windows XP Professional SP2 or later
Windows 2000 SP4 or later
Macintosh OS X (10.4.2 or 10.4.6), running on a PowerPC-based computer
Interface: Equipped with a USB 2.0 port
Note:
This unit and the dedicated driver and software are not compatible with Intel-based Macintosh
computers running Mac OS X.
Installation
• For Windows:
Install the P2 driver on your computer from the included CD-ROM.
The dedicated software is installed at the same time.
For installation instructions, refer to the provided installation manual.
Note:
The P2 driver is software enabling high-speed access of the P2 card via a USB 2.0 cable.
• For Macintosh:
Follow these steps to install the dedicated driver and software applications.
1. Insert the included CD-ROM in your computer
2. Double-click the Macintosh folder in the CD-ROM
3. Copy the AJ-PCS060G folder to a location such as the desktop using drag and drop
4. Double-click the “P2StoreDriver.dmg” disk image module in the AJ-PCS060G folder
5. Double-click “P2StoreDriver.pkg”
The installation screen will now appear. Follow the instructions on the screen to complete
the installation.
Note:
If the dedicated driver is not installed, you cannot access the internal HDD from your computer.
Uninstallation
• For Windows:
For uninstallation instructions, refer to the provided installation manual.
• For Macintosh:
To uninstall the P2 driver and dedicated software, drag the AJ-PCS060G folder from where
it is installed on the computer directly to the trash and empty the trash.