Filter
Top Products
E-23
P2Store Manager screens
Overview of screens
Page tabs
Click the tabs to access different pages.
Page display area
Displays sections with various information about
the unit and buttons for operations.
State display area
Displays “State: Connecting” when the unit is
connected to the computer, otherwise, “State:
Disconnected.”
This page allows confirmation of the partition information of the internal HDD of the unit and the
setting of the format and mounting method.
(The mounting method setting is a function only for Windows.)
HDD page
Partition information section
Displays partition information for data copied
from P2 cards.
Status
Displays the partition status.
“OK”: Normal
“ERROR”: Trouble occurred at some point
during the copying or verification
process.
Serial No.
Displays the source P2 card serial number.
Capacity
Displays the source P2 card capacity (in
MB).
Date
Displays the date of copying.
Quick format button
For quick formatting of the internal HDD, do the
following.
1. Click the [Quick format] button
A confirmation dialog is displayed, prompting
you for approval for formatting.
2. Click [Yes] to execute quick formatting
1), 2)
All erase button
For writing zeros to all sectors of the internal
HDD.
If you are using a battery to power the unit,
switch to an AC adapter before this procedure.
1. Click the [All erase] button
A confirmation dialog is displayed, prompting
you for approval for erasing, after which
another dialog confirms the AC adapter
connection.
2. Click [Yes]
Zeros are written to all sectors.
1)
–
3)
No.
Displays the partition number.
Drive mount point
Displays the assigned drive letter or specified
folder name.