Filter
Top Products
Main Menu (continued)
21
Underlined values indicate factory defaults.
*
1
Factory default setting for the BT-L2150P/1500P.
*
2
Factory default setting for the BT-L2150E/1500E.
*
3
ITU-709 is an ITU-R BT.709 standard.
Enables and disables all GPI functions enabled by GPI CONTROL.
Underlined values indicate factory defaults.
Underlined values indicate factory defaults.
SYSTEM CONFIG
Sub menu Setting Description
CONT./BACK.
BACKLIGHT
CONTRAST
Selects function to be assigned to the CONT./B.LIGHT front panel
buttons.
<BACKLIGHT> Adjusts the B.LIGHT (backlight).
<CONTRAST> Adjusts the CONT. (contrast).
BACKLIGHT 0 to 60
Adjusts LCD backlight brightness. Adjust as required by ambient
conditions.
STATUS DISPLAY
CONTINUE
3SEC OFF
OFF
Sets display state for input signal status (on-screen menu).
<CONTINUE> Displayed at all times.
<3SEC OFF> Displayed for approximately 3 seconds after a status
change.
<OFF > Not displayed.
SETUP LOAD
FACTORY
Loads saved factory defaults (FACTORY).
COLOR SPACE SMPTE-C
*
1
EBU*
2
ITU-709*
3
Sets the studio standard color shade.
POWER DOWN
OFF
ON
Selects whether monitor power shuts off (POWER DOWN) when no
operation has taken place for a preset period of time and no input signal
is present.
<OFF> Disables POWER DOWN.
<ON> Enables POWER DOWN.
GPI
Sub menu Setting Description
GPI CONTROL
DISABLE
ENABLE
Enables and disables GPI functions
<DISABLE> Disabled
<ENABLE> Enabled
INPUT SELECT
Sub menu Setting Description
NTSC SETUP
75
00
Selects NTSC setup level.
<75> Select this function when using 7.5 % setup signals.
(Adjusts the interior of the monitor to the 7.5 % setup level to
suit the black level)
<00> Select this when there is no setup signal.
PC
Performs analog PC settings.(PCJ page 22)