Filter
Top Products
Main Menu (continued)
23
Sets speaker and headphones output.
Underlined values indicate factory defaults.
*
1
When an HDMI signal is selected, CH1 is output to the left channel and CH2 to the right channel.
Underlined values indicate factory defaults.
*
2
Available during VIDEO (NTSC) input.
*
3
When MARKER is set to ON, this setting automatically turns to OFF.
Underlined values indicate factory defaults.
*
4
Only KEY LOCK is enabled when the key lock is engaged.
The picture adjusting buttons are disabled when the lock is engaged.
The KEY LOCK lamp on the front panel is on when the lock is engaged.
AUDIO
Sub menu Setting Description
INPUT SELECT
AUTO
ANALOG
Selects speaker and headphones output.
<AUTO> When an SDI input line is selected with the INPUT
SELECT button on the front panel:
embedded audio (SDI IN terminal)
When an HDMI input line is selected with the INPUT
SELECT button on the front panel:
embedded audio (HDMI terminal)
When input lines other than SDI or HDMI are
selected with the INPUT SELECT button on the front
panel:
analog (AUDIO IN terminal)
<ANALOG> Analog (AUDIO IN terminal)
EMBEDDED
SELECT
*
1
CH7 - CH8
CH5 - CH6
CH3 - CH4
CH1
- CH2
Selects embedded audio CH to output to the speakers or head-
phones.
<CH7 - CH8> Outputs CH7 to the left channel and CH8 to the right
channel
<CH5 - CH6> Outputs CH5 to the left channel and CH6 to the right
channel
<CH3 - CH4> Outputs CH3 to the left channel and CH4 to the right
channel
<CH1 - CH2> Outputs CH1 to the left channel and CH2 to the right
channel
DISPLAY SETUP
Sub menu Setting Description
CLOSED
CAPTION
*
2
*
3
OFF
ON
Enables closed captions display.
CAPTION
CHANNEL
*
2
CC4
CC3
CC2
CC1
Selects the closed caption display channel.
CONTROL
Sub menu Setting Description
KEY LOCK
*
4
OFF
ON
Selects operation (also locks control).
<OFF> Enables front panel operation
<ON> Disables the front panel operations other than POWER switch,
MENU buttons (MENU, , , ENTER), or VOLUME button