Filter
Top Products
27
Detaching and Attaching the Tilt Stand
The tilt stand is detachable.
• When detaching and attaching the protective panel, it is recommended that you place the unit flat on the edge of
a desk or table with a soft cloth or similar material spread underneath.
• The illustration shows an example for BT-L2150P/
2150E.
1. Unscrew the tilt stand screws (four) using a
Phillips screwdriver.
2. Detach the tilt stand.
• After detaching, please store the tilt stand and the tilt
stand screws.
• The illustration shows an example for BT-L2150P/
2150E.
1. Attach the tilt stand to the unit.
• Insert the plate of the tilt stand into part A
(illustrated) of the monitor unit.
2. Screw the tilt stand to the unit by screwing the tilt
stand screws (four) using a Phillips screwdriver.
(Screwing torque: Tighten to about 100 N cm or more)
Maintenance Inspections
Maintenance inspections through periodic and appropriate maintenance are essential to keep the monitor in
optimum condition and ensure safe operation. Be sure to conduct the following maintenance inspections to enable
long-term and full use of all its functions.
Necessity of periodic maintenance service
The backlight in the LCD panel is a consumable component that deteriorates over time leading to gradual loss of
performance that could eventually result in a malfunction.
Conventional after-sales service that replaces parts when they break down should therefore be combined with a
regularly conducted comprehensive service to maintain normal operation and prevent unforeseen breakdown of
consumables.
Maintenance
• Clean the cabinet and protective panel by gently wiping them with a soft cloth.
To remove stubborn soiling, use a cloth dampened in a weak neutral detergent solution and thoroughly wrung
out. Then wipe with a dry cloth.Any moisture entering the monitor could damage it.
• Do not use benzene, thinner and similar solvents for cleaning.
They could discolor the surface and cause the paint to peel.
• Do not directly expose the monitor to spray cleaning.
Any moisture entering the monitor could damage it.
Detaching the tilt stand
ŋ
Ō
Tilt stand screws
Attaching the tilt stand
ŋ
Ō
A
Plate
Tilt stand screws