Filter
Top Products
28
Specifications
■ General
Power input
Dimensions (W x H x D):
<BT-L2150P/2150E>
538 mm x 426 mm x 240 mm
(21-3/16 inches x 16-3/4 inches x
9-7/16 inches)
(including tilt stand)
538 mm x 374 mm x 70 mm
(21-3/16 inches x 14-3/4 inches x
2-3/4 inches)
(monitor only, not including tilt stand)
<BT-L1500P/1500E>
397 mm x 360.5 mm x 240 mm
(including tilt stand)
(15-5/8 inches x 14-3/16 inches x
9-7/16 inches)
397 mm x 308.5 mm x 70 mm
(15-5/8 inches x 12-1/8 inches x
2-3/4 inches)
(monitor only, not including tilt stand)
Mass:
<BT-L2150P/2150E>
Approx. 7.5 kg (16.53 lb) (including tilt
stand)
Approx. 6.0 kg (13.23 lb) (monitor only,
not including tilt stand)
<BT-L1500P/1500E>
Approx. 5.4 kg (11.9 lb) (including tilt
stand)
Approx. 3.9 kg (8.6 lb) (monitor only,
not including tilt stand)
Operating temperature:
5 °C to 35 °C (41 °F to 95 °F)
Operating humidity:
20 % to 80 % (no condensation)
Storage temperature:
- 20 °C to 60 °C (-4 °F to 140 °F)
■ Display panel
<BT-L2150P/2150E>
Dimensions: 54.6 cm (21.5-inch) (effective screen
area)
Aspect ratio: 16:9
Number of pixels:
1920 x 1080 (FULL HD)
Display colors: Approx. 16,700,000 colors
View angle (contrast > 10:1):
160° up/down, 170° right/left
<BT-L1500P/1500E>
Dimensions: 39.1 cm (15.4-inch) (effective screen
area)
Aspect ratio: 16:10
Number of pixels:
1280 x 800 (WXGA)
Display colors: Approx. 16,200,000 colors
View angle (contrast > 10:1):
140° up/down, 160° right/left
■ Input/output Connectors
Video signal input:
VIDEO IN terminal:
1 input, BNC x 1
YP
BPR IN terminal (Analog component):
1 input, BNC x 3
SDI IN (HD/SD) terminals:
SMPTE274M/296M/259M-C/
ITU-R BT.656-4 compliant
2 inputs, BNC x 2
HDMI terminals:
1 input, HDMI terminal x 1 (TYPE A)
HDCP compatible, not VIERA LINK compatible
PC terminal: 1 input, D-SUB, 15-pin x 1
<BT-L2150P/2150E>
Vertical frequency:
60.0 Hz - 75.0 Hz
Horizontal frequency:
31.5 kHz - 64.0 kHz
Dot clock: 25 MHz - 108 MHz
<BT-L1500P/1500E>
Vertical Frequency:
60.0 Hz - 75.0 Hz
Horizontal frequency:
31.5 kHz - 60.0 kHz
Dot clock: 25 MHz - 83.5 MHz
HD/VD signal level:
TTL level
Audio input:
SDI IN (HD/SD) terminals:
EMBEDDED AUDIO
HD - SDI: SMPTE299M compliant
Sampling rate: 48 kHz,
synchronous/asynchronous,
8 ch
SD - SDI: SMPTE272M compliant
Sampling rate: 48 kHz,
synchronous, 4 ch
HDMI terminal:
EMBEDDED AUDIO
AUDIO IN terminal (Analog audio input):
Pin jack x 2 (stereo)
Input level 0.5 Vrms
Speaker output: 0.5 W + 0.5 W
Headphone output: Stereo minijack
M3 x 1, 32 Ω
adjustable level
GPI terminal: D-SUB, 9-pin x 1
<BT-L2150P/2150E>
AC:
Power supply
100 V - 240 V, 50/60 Hz
Current consumption
0.60 A - 0.30 A
<BT-L1500P/1500E>
AC:
Power supply
100 V - 240 V, 50/60 Hz
Current consumption
0.50 A - 0.25 A
indicates safety information.
Inrush current, measured according to European stan-
dard EN55103-1: 11.0 A