Panasonic CF-18 Series Laptop User Manual


 
15
Getting Started
5 Enter your computer name and administrator password and then select [Next].
CAUTION
Remember this password! If the password is forgotten, Windows cannot be
operated.
6 Enter the correct date, time and time zone, then select [Next].
The computer will restart.
7 Enter your administrator password and select .
NOTE
It may take some time before the computer restarts and the screen of step
7 is displayed. Wait, and do not press any keys, or touch the touch pad, etc.
1 Select [start] - [Control Panel] - [User Accounts] - [Create a new account].
9
Create a new account.
NOTE
If the message “Wait several minutes while the optimal configuration is
being set. Do not shutdown the computer during this process.” is displayed,
wait and do not press any keys, or touch the touchpad, etc.
When Windows setup is completed, the following message will be displayed
at the bottom right of the screen: “Your computer might be at risk.” Con-
tinue to the next step.
The message is generated by the [Security Center] function in [Control Panel],
and does not indicate an error or malfunction. For more information about
“Security Center”,
page 26.
NOTE
When creating a new user account:
If you make mail settings, create password reset disks (
page 16), or
conduct other related operations before creating the user account, you
will be unable to use any previous mail history or settings.
When you create the first new account, you can only select [Computer
administrator].
Once a “Computer Administrator” account has been created, you can cre-
ate additional limited user accounts.
Note also that only the added user account will be displayed in the Wel-
come screen. The account for the administrator created during Windows
setup will not be displayed.
2 Enter a name for the new account, then select [Next].
3 Select [Computer administrator], then select [Create Account].
4 <When you want to create a password for the new account>
Select the new account you have created and select [Create a password].
Follow the instructions on the screen to create a password.
8
Calibrate the touchscreen.
1 Select [start] - [Control Panel] - [Printers and Other Hardware] - [Mouse] -
[TouchScreen] - [Calibration].
2 Touch the “+” mark on the calibration screen with the stylus (included) for about
one second.
3 After the calibration procedure is executed (e.g., after the nine “+” marks are
touched), the procedure ends when Enter is pressed.
4 Select [OK].