Filter
Top Products
Starting Up/Shutting Down
14
Operation
z You may encounter the following situations when the computer is turned on at
very low temperatures. These functions are designed to prevent hard disk drive
malfunctions that may occur at low temperatures.
If the screen on the left is displayed immediately after
you turn on the power...
A password has been set to ensure the computer’s security.
Enter your password
*1
and press
Enter
. ( ⇒ Reference Manual “Security Mea-
sures”)
z When the correct password is input, the computer will start.
z When three incorrect password attempts or nothing is input for one minute, the
computer will power off.
*1
Supervisor Password or User Password set in the Setup Utility (not the Windows password).
Situation Action
The computer turns on, and the mes-
sage “Warming up the system (up to
20 minutes)” is displayed.
The computer is warming up before start up.
Wait for the computer to start up (takes up to
20 minutes).
However, the computer may fail to warm up
and the message “Cannot warm up the sys-
tem” will be displayed, and the computer will
not start. In this case, turn off the computer,
and leave it in an environment with a tempera-
ture of 5 °C {41 °F} or more for about an hour,
after which try turning the power on once
more.
z The computer does not turn on.
z The computer does not resume
operation from standby or hiber-
nation mode.
(The power indicator blinks quickly in
green.)
Leave it in an environment with a temperature
of 5 °C {41 °F} or more for about an hour, then
try turning the power on once more.