Filter
Top Products
- 143 -
Reducing the time required for positioning
■
Using a card reader/writer (commercially available)
Preparation: • Turn on the computer that is connected to a card reader/writer
(commercially available) and close all other open application programs.
• Insert a memory card in the camera before starting the updating
procedure.
Press [MENU/SET]
Use cursor button to select [GPS] menu and press
[MENU/SET]
Use cursor button to select [Assist Data] and press
[MENU/SET]
Use cursor button to select [Update] and press [MENU/SET]
Use cursor button to select [SD card] and press [MENU/SET]
The “GPS Assist Tool” is copied to a memory card.
Turn off the camera and remove the memory card
Insert the memory card into a card reader/writer (commercially
available) connected to the computer
Start up the “GPS Assist Tool” stored in the memory card on
the computer and update the GPS assist data (→144)
Remove the memory card from the computer
Insert the memory card into the camera and turn on the
camera
The GPS assist data of the camera is updated.