Filter
Top Products
28
Chapter 2 Scan/Email Operations
9
Select “Cc”, “Bcc” or “From” address
field, and follow the same procedures
as in steps 7 and 8 if necessary.
zIf the Function Parameter “145 Sender
Selection” (Fax/Email Settings> Fax
Parameters) is set to “Valid”, you can preset
up to 25 sender names. You can select from
the sender list when sending an Email.
However, if you select “From” on the Email
screen, the sender list will not be displayed.
zFor more details on this setting, refer to Fax/
Email Settings in the Operating Instructions
(For Function Parameters) on the provided
CD-ROM.
10
Input the subject if necessary.
zDefault Subject is preset if “21 Default
Subject” has been set in Function
Parameters (Fax/Email Settings> User
Parameters). For programming instructions,
refer to Fax/Email Settings in the Operating
Instructions (For Function Parameters) on
the provided CD-ROM.
1 Select “Subject”.
2 Input a subject, and then select “OK”.
zUp to 40 characters.
zFor instructions on how to enter characters,
refer to Using the Keyboard in the
Operating Instructions (For Function
Parameters) on the provided CD-ROM.
11
Select “Close”.
12
Press the Start key.
Sending an Email with image file(s) attached.
13
Push the SD Memory Card, and then
remove it.
zDo not remove the SD Memory Card while
the Access Indicator is flashing.
14
Close the Slot Cover.