Filter
Top Products
31
Chapter 2 Scan/Email Operations
9
Select “Cc”, “Bcc” and/or “From”
address field, and follow the same
procedures as in steps 7 and 8 if
necessary.
zIf the Function Parameter “145 Sender
Selection” (Fax/Email Settings> Fax
Parameters) is set to “Valid”, you can preset
up to 25 sender names. You can select from
the sender list when sending an Email.
However, if you select “From” on the Email
screen, the sender list will not be displayed.
zFor more details on this setting, refer to Fax/
Email Settings in the Operating Instructions
(For Function Parameters) on the provided
CD-ROM.
10
Input the subject if necessary.
zDefault Subject is preset if “21 Default
Subject” has been set in Function
Parameters (Fax/Email Settings> User
Parameters). For programming instructions,
refer to Fax/Email Settings in the Operating
Instructions (For Function Parameters) on
the provided CD-ROM.
1 Select “Subject”.
2 Input a subject, and then select “OK”.
zUp to 40 characters.
zFor instructions on how to enter characters,
refer to Using the Keyboard in the
Operating Instructions (For Function
Parameters) on the provided CD-ROM.
11
Select “Close”.
12
Press the Start key.
Sending an Email with image file(s) attached.
13
Push the Eject button on the right side
of PCMCIA/PC Card Slot, and then
remove the PCMCIA/PC Card
Adapter.
zDo not remove the PCMPIA/PC Card
Adapter while the Access Indicator is
flashing.
14
Close the Slot Cover.