Panasonic HDC-TM80 Webcam User Manual


 
- 127 -
Do not use the unit for surveillance
purposes or other business uses.
This unit was designed for consumer
intermittent use. It was not intended for
continuous use, or for any industrial or
commercial application resulting in
prolonged use.
In certain situations, continuous use could
cause the unit to overheat and cause a
malfunction. Such use is strongly
discouraged.
When you are not going to use the unit
for an extended time
When storing the unit in a cupboard or
cabinet, it is recommended that you place
a desiccant (silica gel) in with it.
/
When disposing of or giving away this
unit, note that:
Formatting and deletion simply change the
file management information and cannot
be used to completely erase the data in
built-in memory or HDD of this unit. The
data can be recovered using commercially
available software or the like.
We recommend that you physically format
the built-in memory or HDD before
disposing of or giving away this unit.
To physically format the built-in memory,
connect the unit via the AC adaptor, select
[SETUP] # [FORMAT MEDIA] # [Built-
inMemory] from the menu, and then press
and hold the recording start/stop button on
the screen below for about 3 seconds.
When the built-in memory data deletion
screen appears, select [YES], and then
follow the on-screen instructions.
To physically format the HDD, connect the
unit via the AC adaptor, select [SETUP] #
[FORMAT MEDIA] # [HDD] from the
menu, and then press and hold the
recording start/stop button on the screen
below for about 3 seconds. When the
HDD data deletion screen appears, select
[YES], and then follow the on-screen
instructions.
Please look after the data in your built-in
memory or HDD carefully. Panasonic will
not be held responsible in the unlikely
case that private data is divulged.