Filter
Top Products
- 62 -
5 (When [SELECT] is selected in step 4)
Touch the range of pictures that will be stored.
≥ Previous (Next) page is displayed by touching /
.
* Only select the picture for start point if only 1 picture
is to be stored.
≥ A confirmation message is displayed when [Enter] is
touched after selecting the start point and finish
point. Touch [YES] to store the pictures.
≥ If you turn off the unit or change the mode, this function is cancelled.
≥ The maximum number of times you can record on a media: 15
(In the case of SD cards it is the maximum number of recordable scenes per card.)
≥ Colour balance and brightness on the screen may change with some light sources such as
fluorescent lamps.
≥ Image quality is different from ordinary still picture recording.
The photo light is turned on to make it easier to focus when you are recording in dark places
where it is hard to focus.
≥ Switch to manual mode. (l 63)
≥ Set the photo light to ([AUTO]) or
([OFF]). (l 47)
≥ When switching to intelligent auto mode, the setting is fixed to [AUTO] and cannot be
changed.
≥ It may not turn on when the LED light is very hot.
You can add a shutter sound when recording still pictures.
≥ No shutter sound is emitted in motion picture recording mode.
[AF ASSIST LAMP]
: [PICTURE] # [AF ASSIST LAMP] # [AUTO]
[SHTR SOUND]
: [PICTURE] # [SHTR SOUND] # desired setting
[OFF]: Cancel the setting.
: Volume low
: Volume high
A Start point
*
B Finish point
MENU
MENU