Panasonic KV-S2065W Scanner User Manual


 
28
Display Panel Instructions
06 Checking the roller cleaning warning
0%: This is displayed when “Clean Roller Warning ≤≤%”
displayed is cleared.
100%: This is displayed when the roller needs to be cleaned.
06 Clearing the roller cleaning warning
When pressing the
1
key and the
2
key simultaneously,
“Clean Roller Warning” will be cleared. Then “Completed” will be
displayed.
07 Checking the roller modules
replacement warning
0% : This is displayed when “Replace Roll. Warning ≤≤%”
displayed is cleared.
100% : This is displayed when the roller modules need to be
replaced.
07 Clearing the roller modules
replacement warning
When pressing the
1
key and the
2
key simultaneously,
“Replace Roll. Warning” will be cleared. Then “Completed” will
be displayed.
08 Setting the product ID
The applications for the scanner which have been set can be
used.
An error results if an attempt is made to use a function which
are not provided with the KV-S2065 series of scanners.
No guarantees are given for complete compatibility.
09 Setting the sleep mode
To conserve energy and operating cost,
this scanner is provided with a
programmable power save feature. The
scanner is factory set with the power save
feature (sleep mode) turned on to comply
with ENERGY STAR® requirement. If sleep
mode is enabled, the scanner enters the
sleep mode when the scanner is idle for 15
minutes.
1min. T 60min.
To return from the sleep mode, press any key on the scanner
or issue the scan instruction from the application.
06.Cl ean
Warning
Ro l l e r
0 %
06.Cl ean
Warning
Ro l l e r
07.Repl a
Warning  0%
ce Rol l .
07.Repl a
Warning
ce Rol l .
08.Produ
KV-S2065
ct ID
KV-S2065 KV-SS855
KV-S2055
KV-S6045
KV-S6055
09.Sleep
Af ter 15min.
Mode
DisableAfter 1 min. T After 60 min.