Panasonic KV-S2065W Scanner User Manual


 
22
Display Panel Instructions
When scanning a document which is shorter than 210 mm / 8.3" (A5 size) in length, double feed detection will
not work well.
Thick, creased, or edited documents with correction fluid as well as documents with holes near the center may
give you false double feed warning.
12 Black line removal
This setting is valid only when the white roller kit is installed.
13 Scanning mode
Fit to Page : Scanner shrinks image to fit scanned page.
Actual
:
Scanner scans at 100% actual page size.
Some of the data on the edges of the page may be
lost.
14 Double feed detection
If set to “Detect”, the scanner will sound a buzzer and the power
indicator will flash red when double feeding is detected. Even if
this buzzer is set to “OFF” in “Setting the buzzer” (see page 27),
it will still ring.
When scanning very important documents, confirm if the
number of scanned pages displayed on the LCD matches the
number of actual pages.
15 Setting the “Double Feed” detector
action
Host
:
The scanner will act in response to commands from the
host computer.
Stop
:
The scanner will display double feeding error and stop
when it detects double feeding.
Buzzer
:
When the scanner detects double feeding, it will sound
a buzzer, the power indicator will light red and it will
continue scanning.
After completing scanning, the scanner will display
double feeding warning.
16 Setting the double feed detector
sensitivity
Low sensitivity: The double feed detector’s sensitivity will be low.
Set this when there is an error for no double
feeding.
High sensitivity:The double feed detector’s sensitivity will be
high. Set this when there is no error for double
feeding.
12 .BLK L
Remove Hos t
ine
DisableHost Enable
13.Scann
Hos t
i ng Mode
Fit to PageHost Actual
14.Doubl
Hos t
e Feed
Not detectHost Detect
15.Doubl
Ac t i on Hos t
e Feed
StopHost Buzzer
16.Doubl
Hos t
e Feed
Sens ·
Low sensitivitySens. Host
Normal Sens. High sensitivity