Filter
Top Products
41
Replacing Consumables
If “Warning Replace Roller” message is displayed on the LCD, replace the paper feed roller module and retard roller
module at the same time.
1
Turn the power off and unplug the
power cord.
2
Use your hand to pull towards you the
front door release.
Then open the front door completely.
3
Place your finger on the paper feed
roller block shaft and pull it towards
you to remove the paper feed roller
block from the magnet. (1)
Push down the green levers and
remove the paper feed roller module
from the scanner by holding the green
levers. (2)
•
The paper feed roller block is attached by
a magnet.
• When moving the green levers, do not
apply pressure in any other direction
than the arrows.
They may break.
Front door
Front door release
(I id h f d )
Paper feed roller block
1
Green levers
2
2
: off position
Power switch