Filter
Top Products
12
Component Identification
Exit substopper
Exit extension tray
Exit stopper
Document guide
Hopper extension
tray
Hopper
Front door release
Inside the front door.
Exit document
guide
Power indicator
When the power is
turned on, the green
indicator lights.
When an error occurs,
the indicator will
change to red, and
light steadily or flash.
Power switch
[ : on position
≤ : off position
Display panel
When performing
each setting, used to
display the scanning
conditions, etc.
Front door
ADF / manual feed
selector
To prevent double feeding,
adjust the selector to feed
the scanning document
properly.
(Refer to page 33.)
Connectors
Used to connect the
scanner unit to the
host computer.
AC inlet
Power cord
Fan exhaust vent
Paper path selector
Used to change the
scanning document’s path
direction (front side/back
side).
(Refer to page 33.)
Pre-imprinter door
(Top door)
Used for attaching the
imprinter unit and ink
cartridge.
An imprinter unit installed
here is called a pre-
imprinter.
Post-imprinter door (Back door)
Used for attaching the imprinter unit and ink
cartridge.
An imprinter unit installed here is called a post-
imprinter.