Filter
Top Products
50
Troubleshooting
LCD
Possible Cause Remedy
The rollers are dirty.
Clean the rollers.
(See page 36 through 38.)
The rollers need to be
replaced.
Replace the paper feed roller
module and retard roller module.
(See pages 41 through 45.)
Multiple sheets were fed into
the unit.
Open the front door and remove
the jammed paper.
(See page 35.)
The document is jammed.
Open the front door and remove
the jammed paper.
(See page 35.)
The document is jammed.
Open the front door and remove
the jammed paper.
(See page 35.)
The document is jammed.
Open the front door and remove
the jammed paper.
(See page 35.)
The document is jammed.
Open the front door and remove
the jammed paper.
(See page 35.)
The document is jammed.
Open the front door and remove
the jammed paper.
(See page 35.)
The document is jammed.
Open the front door and remove
the jammed paper.
(See page 35.)
The document is jammed.
Open the front door and remove
the jammed paper.
(See page 35.)
A document remains in the
scanner.
Open the front door and remove
all of the remaining documents.
Dust adheres to the document
sensors.
Clean a dust using the included
blower.
(See page 39.)
Multiple sheets were fed into
the unit.
Open the front door and remove
the jammed paper.
(See page 35.)
The front door is open. Close the front door.
✽✽✽Warn
Cl ean Rol l e r
ing✽✽✽
✽✽✽Warn
Rep l ace Ro l l e r
ing✽✽✽
✽✽✽Warn
Db l . Feed Occu r ed
ing✽✽✽
U11 JAM
✕✕✕✕✕✕✕✕
U12 JAM
✕✕✕✕✕✕✕✕
U13 JAM
✕✕✕✕✕✕✕✕
U14 JAM
✕✕✕✕✕✕✕✕
U15 JAM
✕✕✕✕✕✕✕✕
U16 JAM
✕✕✕✕✕✕✕✕
U17 JAM
✕✕✕✕✕✕✕✕
U18 Rema
✕✕✕✕✕✕✕✕
ind Doc.
U23 Doub
✕✕✕✕✕✕✕✕
l e Feed
U30 F ron
✕✕✕✕✕✕✕✕
tDoor