Filter
Top Products
Changing the Scan Background Color
By reversing the flatbed sheet on the unit, you can change the scanning background color between black and
white. The default setting is black.
When scanning documents like those listed below, set the flatbed sheet to white.
• Thin paper
• OHP sheet
• Plastic films, etc.
Reversing the flatbed sheet
1. Lift the document cover (A) directly upwards, and remove it.
1
2. Turn the document cover over, and then push the center of the rear edge (A) of the flatbed sheet towards
you with your finger.
1
2
4
3
5
Notice
• Confirm that the ears (B, C) of the flatbed sheet are clear of the tabs (D, E) of the document
cover.
22 Operating Instructions
Operation