Filter
Top Products
4. SMS (KX-FC225AL only)
29
characters you can send or receive may be limited by
your SMS service provider/telephone company.
Consult your SMS service provider/telephone
company for details.
L If your message contains over 160 characters, the
message is a long message and “@@Long
Message@@” is displayed. Your service
provider/telephone company may treat long
messages differently from other messages. Consult
your service provider/telephone company for details.
L If your phone is connected to a PBX, store the PBX
line access number (page 30).
4.4.2 Sending a saved message
1
{j/OK} i “SMS” i {>}
2 To access the public mailbox
“Public” i {>}
To access a private mailbox
Select the desired mailbox. i {>} i Enter its
password.
3 “Send List” i {>}
4 To read a saved message, press {^} or {V} to select
the message. i {j/OK}
5 To send the message, press {j/OK}. i “Send”
i {>}
6 Press and hold {C/T} to erase all numbers, then
continue from step 5, “4.4.1 Writing and sending a
new message”, page 28.
4.4.3 Editing and sending a saved
message
1
{j/OK} i “SMS” i {>}
2 To access the public mailbox
“Public” i {>}
To access a private mailbox
Select the desired mailbox. i {>} i Enter its
password.
3 “Send List” i {>}
4 Press {^} or {V} to select the message. i
{j/OK}
5 {j/OK} i “Edit Message” i {>} i
Continue from step 4, “4.4.1 Writing and sending a
new message”, page 28.
4.4.4 Erasing saved messages
1
{j/OK} i “SMS” i {>}
2 To access the public mailbox
“Public” i {>}
To access a private mailbox
Select the desired mailbox. i {>} i Enter its
password.
3 “Send List” i {>}
4 Press {^} or {V} to select the message. i
{j/OK}
5 {j/OK} i “Erase” i {>}
L To erase all messages in the selected mailbox,
select “Erase All”. i {>}
6 “Yes” i {>} i {ih}
4.5 Receiving a message
When an SMS message is received:
– a tone is heard (if the cordless handset ringer is
turned on)
– “Receiving SMS Message” is displayed
– F is displayed
– the message indicator on the cordless handset
flashes if the message alert feature (page 52) has
been turned on
4.5.1 Reading a received message
1
{j/OK} i “SMS” i {>}
2 To access the public mailbox
“Public” i {>}
To access a private mailbox
Select the desired mailbox. i {>} i Enter its
password.
L If a mailbox contains new (unread) SMS
messages, “@” is displayed next to the total
number of messages for that mailbox.
3 “Receive List” i {>}
4 Press {^} or {V} to select a message.
L Messages which have already been read are
indicated by a “Q”, even if they were read using
another cordless handset.
5 Press {j/OK} to read the message content.
Note:
L To call the message sender, press {C} or {s}.
4.5.2 Replying to a message
1
While reading a received message, press {j/OK}.
2 “Reply” i {>}
3 Enter a message (page 58). i {j/OK}
4 Edit the destination phone number and/or press
{j/OK}.
5 Continue from step 6, “4.4.1 Writing and sending a
new message”, page 28.
Editing/forwarding a message
1. While reading a received message, press {j/OK}.
2. “Edit Message” i {>}
3. Continue from step 4, “4.4.1 Writing and sending a
new message”, page 28.