Filter
Top Products
113
Error Messages
Help
Display message Cause & Remedy
UNIT OVERHEATED
TRANSMIT ERROR
REMOVE DOCUMENT
REDIAL TIME OUT
POLLING ERROR
PLEASE WAIT
PAPER JAMMED
NO FAX REPLY
MODEM ERROR
MEMORY FULL
EASY DIAL FULL
FREE FILM EMPTY
FILM NEAR EMPTY
FILM EMPTY
FAX MEMORY FULL
FAX IN MEMORY
CHECK PAPER
CHECK MEMORY
●
Memory (telephone numbers, parameters, etc.) has been erased. Re-program.
●
The recording paper is not installed or the unit has run out of paper. Install paper
and press to clear the message.
●
The recording paper is not fed into the unit properly or has jammed near the
recording paper entrance. Clear the jammed paper and press
to clear the message (see “When paper has jammed near the recording paper
entrance” on page 119).
Do not install folded or heavily curled paper in the paper tray.
●
The unit has a document in memory. See the other displayed message
instructions to print out the document.
●
Memory is full of received document due to a lack of recording paper or a
recording paper jam etc. Install paper or clear the jammed paper.
●
When performing memory transmission, the document being stored exceeds the
memory capacity of the unit. Transmit the entire document using manual or
automatic transmission.
●
The film is empty. Replace the film or film cartridge (p. 123–125).
●
The film is slack. Tighten it (see step 3 on page 123 and step 8 on page 125)
and install again.
●
The remaining film can print about 10 pages of A4 size documents. Prepare a
new film or film cartridge (p. 15).
●
The free starter film is empty. Replace the film or
film
cartridge (p. 123–125).
●
There is no space to store new stations in the EASY DIAL directory. Edit or
erase unnecessary stations (p. 41).
●
When making copy, the document being stored exceeds the memory capacity of
the unit. Press to clear the message.
●
There is something wrong with the modem circuit. Contact our service personnel.
●
The other party’s fax machine is busy or has run out of recording paper. Try
again.
●
A recording paper jam occurred under the film cartridge. Clear the jammed
paper (p. 118).
●
The unit is checking that there is no slack on the film. Wait a while.
●
The other party’s fax machine does not provide the polling function. Check with
the other party.
●
The other party’s fax machine is busy or has run out of recording paper. Try
again.
●
The document is jammed. Remove the jammed document (p. 120).
●
Attempted to transmit a document longer than 600 mm. Press to
remove the document. Divide the document into two or more sheets and try
again.
●
A transmission error occurred. Try again.
●
The unit is too hot. Let the unit cool down.
STOP
STOP
START/SET/COPY
START/SET/COPY
(continued)